An official website of the United States government
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

Image Gallery

Clear Filters | 1361 - 1380 of 2670 results

Creating new parts from scratch

U.S. Air Force Staff Andrew Walker, a fabrication specialist with the 379th Expeditionary Maintenance Squadron uses a manual lathe to create a cylindrical part at Al Udeid Air Base, Qatar, June 5, 2017. Walker is part of a team of machinists and welders which are trained on a wide range of manual and computer numerical controlled machines to manufacture and repair aircraft components and support equipment. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Creating new parts from scratch

U.S. Air Force Staff Andrew Walker, a fabrication specialist with the 379th Expeditionary Maintenance Squadron uses a computer numerical control machine at Al Udeid Air Base, Qatar, June 5, 2017. The CNC allows Walker and other machinists to increase the speed of the manufacturing and reduce the wait time for new aircraft parts. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Creating new parts from scratch

U.S. Air Force Staff Andrew Walker, a fabrication specialist with the 379th Expeditionary Maintenance Squadron uses a computer numerical control machine at Al Udeid Air Base, Qatar, June 5, 2017. The CNC allows Walker and other machinists to increase the speed of the manufacturing and reduce the wait time for new aircraft parts. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Creating new parts from scratch

U.S. Air Force Master Sgt. Anwar Simmons, section chief with the 379th Expeditionary Maintenance Squadron, sets up the abrasive waterjet cutting machine at Al Udeid Air Base, Qatar, June 5, 2017. The abrasive waterjet cutting machine allows the airmen to create a wide range of aircraft parts or tools needed to complete the mission in an expedited and a cost effective manner. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Creating new parts from scratch

The abrasive waterjet cutting machine located in the fabrication shop of the 379th Expeditionary Maintenance Squadron uses a high velocity coherent stream of 98% water and 2% sand to cut through almost any material at Al Udeid Air Base, Qatar, June 5, 2017. The abrasive waterjet cutting machine allows the airmen to create a wide range of aircraft parts or tools needed to complete the mission in an expedited and a cost effective manner. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Fueling the fight

A Royal Australian Air Force EA-18F Super Hornet departs after receiving fuel from a U.S. Air Force KC-135 Stratotanker assigned to 340th Expeditionary Air Refueling Squadron in support of Operation Inherent Resolve on July 1, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Air Forces Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Fueling the fight

A U.S. Air Force A-10 Thunderbolt II approaches a KC-135 Stratotanker assigned to the 340th Expeditionary Air Refueling Squadron to refuel during a flight in support of Operation Inherent Resolve on July 1, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Air Forces Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Fueling the fight

A U.S. A-10 Thunderbolt II receives fuel from a KC-135 Stratotanker assigned to the 340th Expeditionary Air Refueling Squadron during a flight in support of Operation Inherent Resolve on July 1, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Air Forces Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Fueling the fight

A U.S. Air Force A-10 Thunderbolt II dispenses a flare during a flight in support of Operation Inherent Resolve on July 1, 2017. The A-10 Thunderbolt II provides close air support to ground forces throughout the U.S. Air Forces Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Checking the oil

U.S. Air Force KC-135 Stratotankers sit on the ramp at Al Udeid Air Base, Qatar, June 30, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Checking the oil

A U.S. Air Force KC-135 Stratotanker from MacDill Air Force Base, Tampa Bay, Fla. sits on the ramp at Al Udeid Air Base, Qatar, June 30, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Checking the oil

U.S Air Force crew chief with the 340th Expeditionary Aircraft Maintenance Unit places oil into an engine on a KC-135 Stratotanker at Al Udeid Air Base, Qatar, June 30, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Checking the oil

U.S Air Force crew chief with the 340th Expeditionary Aircraft Maintenance Unit checks the oil level on a KC-135 Stratotanker at Al Udeid Air Base, Qatar, June 30, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Checking the oil

U.S Air Force crew chief with the 340th Expeditionary Aircraft Maintenance Unit places oil into an engine on a KC-135 Stratotanker at Al Udeid Air Base, Qatar, June 30, 2017. The KC-135 Stratotanker provides aerial refueling support to U.S. and coalition aircraft 24/7 throughout the U.S. Central Command area of responsibility. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download

Airfield management manages the runway to our success

U.S. Air Force Senior Airman Thomas Smith, airfield management shift lead assigned to the 379th Expeditionary Office of Strategic Services, checks his vehicle tires for foreign objects by completing a foreign object damage (FOD) check prior to driving onto the runway at Al Udeid, Air Force Base, Qatar, June 7, 2017. Airfield Management oversees the 23.3 million square feet of airfield at Al Udeid in addition to overseeing the airfield driving program and filing all flight plans for flights arriving to and departing from the base. (U.S. Air National Guard photo by Tech. Sgt. Bradly A. Schneider/Released)
Details Download

Airfield management manages the runway to our success

U.S. Air Force Senior Airman Thomas Smith, airfield management shift lead assigned to the 379th Expeditionary Office of Strategic Services, picks up small stones from the runway during a general runway inspection at Al Udeid, Air Force Base, Qatar, June 7, 2017. Airfield Management oversees the 23.3 million square feet of airfield at Al Udeid in addition to overseeing the airfield driving program and filing all flight plans for flights arriving to and departing from the base. (U.S. Air National Guard photo by Tech. Sgt. Bradly A. Schneider/Released)
Details Download

Airfield management manages the runway to our success

U.S. Air Force Senior Airman William Terry, airfield management shift lead assigned to the 379th Expeditionary Office of Strategic Services, walks the runway at dusk during a lighting check at Al Udeid, Air Force Base, Qatar, June 22, 2017. Airfield Management oversees the 23.3 million square feet of airfield at Al Udeid in addition to overseeing the airfield driving program and filing all flight plans for flights arriving to and departing from the base. (U.S. Air National Guard photo by Tech. Sgt. Bradly A. Schneider/Released)
Details Download

Airfield management manages the runway to our success

U.S. Air Force Senior Airman William Terry, airfield management shift lead assigned to the 379th Expeditionary Office of Strategic Services, asks to see a drivers airfield driver’s license during a random driver’s license check conducted on the runway at Al Udeid, Air Force Base, Qatar, June 22, 2017. Airfield Management oversees the 23.3 million square feet of airfield at Al Udeid in addition to overseeing the airfield driving program and filing all flight plans for flights arriving to and departing from the base. (U.S. Air National Guard photo by Tech. Sgt. Bradly A. Schneider/Released)
Details Download

Col. Jeffrey Schreiner Official Portrait

U.S. Air Force Colonel Jeffrey Schreiner, vice commander, 379th Air Expeditionary Wing was photographed on May 22, 2017. (captioning by TSgt Bradly A. Schneider/Released)
Details Download

Riggers ensure airdrops run smoothly

U.S. Army Soldiers with the 824th Quartermaster Company Detachment 2 place suspension lines on top of a joint precision airdrop system at Al Udeid Air Base, Qatar, May 31, 2017. The Soldiers completed an inspection of the JPADS that included, but was not limited to, cleaning and any repairs necessary on the system attached to equipment used in airdrop operations. (U.S. Air Force photo by Tech. Sgt. Amy M. Lovgren)
Details Download