An official website of the United States government
A .mil website belongs to an official U.S. Department of Defense organization in the United States.
A lock (lock ) or https:// means you’ve safely connected to the .mil website. Share sensitive information only on official, secure websites.

Image Gallery

Clear Filters | 1681 - 1700 of 2670 results

Maintenance Airmen keep birds flying

U.S. Air Force Airman 1st Class Levi Amell, an aircraft structural maintenance journeyman with the 379th Expeditionary Maintenance Squadron Sheet Metal Shop, cuts a sheet of metal using a foot shear at Al Udeid Air Base, Qatar, Feb. 16, 2017. Amell needed to cut the metal to specific measurements to fit it into place on an outbound flap for an aircraft that lost a piece of metal during flight. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Maintenance Airmen keep birds flying

U.S. Air Force Senior Airman Wolfgang Kimsey, an aircraft structural maintenance journeyman with the 379th Expeditionary Maintenance Squadron Sheet Metal Shop, cuts a piece of metal using a throatless shear at Al Udeid Air Base, Qatar, Feb. 16, 2017. Kimsey needed to cut the metal to specific measurements to fit it into place on an outbound flap for an aircraft that lost a piece of metal during flight. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Maintenance Airmen keep birds flying

U.S. Air Force Airman 1st Class Stephen Hunter, an aircraft structural maintenance journeyman with the 379th Expeditionary Maintenance Squadron Sheet Metal Shop, prepares to shoot rivets into a boom operator sight at Al Udeid Air Base, Qatar, Feb. 16, 2017. Hunter was installing a patch onto the piece, which fits onto a KC-135 Stratotanker. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Maintenance Airmen keep birds flying

U.S. Air Force Airman 1st Class Mitchell Rogers, an aircraft structural maintenance journeyman with the 379th Expeditionary Maintenance Squadron Sheet Metal Shop, removes old rivets from an outbound flap for an aircraft at Al Udeid Air Base, Qatar, Feb. 16, 2017. A piece of metal was torn off of the flap during flight, and needed to be fixed. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Maintenance Airmen keep birds flying

U.S. Air Force Airman 1st Class Levi Amell, left, and Senior Airman Wolfgang Kimsey, aircraft structural maintenance journeymen with the 379th Expeditionary Maintenance Squadron Sheet Metal Shop, take measurements for a replacement piece on an outbound flap for an aircraft at Al Udeid Air Base, Qatar, Feb. 16, 2017. In order to fabricate a new piece, the Airmen needed to measure the area to be replaced on the flap. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Logistics Airmen ensure fuel quality

U.S. Air Force Senior Airman Kendra Jenkins, a fuels apprentice with the 379th Expeditionary Logistics Readiness Squadron Fuels Laboratory, checks fuel for additives used to prevent the fuel from freezing at Al Udeid Air Base, Qatar, Feb. 14, 2017. At high altitudes, fuel is susceptible to freezing due to the low temperatures and traces of water that may be inside the fuel. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Logistics Airmen ensure fuel quality

U.S. Air Force Airman 1st Class Jamar Gresham, a fuels apprentice with the 379th Expeditionary Logistics Readiness Squadron Fuels Laboratory, conducts a bottle method test on a sample of fuel at Al Udeid Air Base, Qatar, Feb. 14, 2017. The bottle method test is a way to determine the amount of particulates within fuel by passing it through a filter using a vacuum. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Logistics Airmen ensure fuel quality

U.S. Air Force Airman 1st Class Jamar Gresham, a fuels apprentice with the 379th Expeditionary Logistics Readiness Squadron Fuels Laboratory, determines the temperature of a bottle of fuel at Al Udeid Air Base, Qatar, Feb. 14, 2017. In order to perform a bottle method test on fuel, it must first be brought to a temperature between 64-86 degrees Fahrenheit. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Logistics Airmen ensure fuel quality

U.S. Air Force Staff Sgt. Mario Shanks, fuels laboratory NCO in charge with the 379th Expeditionary Logistics Readiness Squadron, checks fuel density with a hydrometer at Al Udeid Air Base, Qatar, Feb. 14, 2017. Shanks conducted an American Petroleum Institute specific gravity test on a sample of fuel to determine the density of the fuel which helps them track how much is used. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Logistics Airmen ensure fuel quality

U.S. Air Force Staff Sgt. Mario Shanks, fuels laboratory NCO in charge with the 379th Expeditionary Logistics Readiness Squadron, stands by as a flash point tester checks a sample of fuel at Al Udeid Air Base, Qatar, Feb. 14, 2017. Checking the flash point helps determine what temperature the fuel burns at, and the type of fuel it is. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

Saving time, money: Education center holds DSST/CLEP-a-thon

Personnel stationed at Al Udeid Air Base, Qatar, pose for a photo during a “CLEP-a-thon,” Feb. 11, 2017. The testing marathon was held to encourage service members to take DANTES Subject Standardized Test exams and College Level Examination Program tests while deployed, in turn saving themselves time and the Air Force money in tuition assistance. (U.S. Air Force photo by Senior Airman Cynthia A. Innocenti)
Details Download

Saving time, money: Education center holds DSST/CLEP-a-thon

Personnel stationed at Al Udeid Air Base, Qatar, take tests during a “CLEP-a-thon,” Feb. 11, 2017. The CLEP-a-thon was a testing marathon during which service members took DANTES Subject Standardized Test exams and College Level Examination Program tests. (U.S. Air Force photo by Senior Airman Cynthia A. Innocenti)
Details Download

Saving time, money: Education center holds DSST/CLEP-a-thon

Food provided by military spouses are laid out as service members take tests during a “CLEP-a-thon” at Al Udeid Air Base, Qatar, Feb. 11, 2017. The CLEP-a-thon was a testing marathon during which service members took DANTES Subject Standardized Test exams and College Level Examination Program tests. (U.S. Air Force photo by Senior Airman Cynthia A. Innocenti)
Details Download

Leadership course sets PACE for deployed Airmen

U.S. Air Force Lt. Col. George Sanderlin, senior professionalism instructor for the Profession of Arms Center of Excellence course, speaks to a theater full of Airmen at Al Udeid Air Base, Qatar, Feb. 10, 2017. The Airmen attended the first PACE course taught in the U.S. Central Command area of responsibility. (U.S. Air Force photo by Senior Airman Cynthia A. Innocenti)
Details Download

Leadership course sets PACE for deployed Airmen

Personnel deployed to Al Udeid Air Base, Qatar, attend a Profession of Arms Center of Excellence course being held for the first time in the U.S. Central Command area of responsibility, Feb. 10, 2017. PACE is a course designed to enhance organizational leadership by arming Airmen with skills that may guide healthy relationships at work, home and within the individuals’ local community. (U.S. Air Force photo illustration by Senior Airman Cynthia A. Innocenti)
Details Download

More than meets the eye: Maintainers inspect below the surface

U.S. Air Force Airman 1st Class Austin Hall, a non-destructive inspection journeyman with the 379th Expeditionary Maintenance Squadron Fabrication Flight, prepares the magnetic inspection unit for a fluorescent penetrant inspection at Al Udeid Air Base, Qatar, Feb. 9, 2017. Hall conducted a magnetic particle inspection to look for defects in a piece of metal. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

More than meets the eye: Maintainers inspect below the surface

U.S. Air Force Senior Airman Devin Jordan, a non-destructive inspection journeyman with the 379th Expeditionary Maintenance Squadron Fabrication Flight, calibrates an eddy current unit at Al Udeid Air Base, Qatar, Feb. 9, 2017. This unit uses electric current to detect surface-level defects in metal on aircraft. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

More than meets the eye: Maintainers inspect below the surface

U.S. Air Force Airman 1st Class Travis Nevison, a non-destructive inspection journeyman with the 379th Expeditionary Maintenance Squadron Fabrication Flight, prepares to burn a test oil sample at Al Udeid Air Base, Qatar, Feb. 9, 2017. The joint oil analysis program utilizes oil samples gathered from aircraft to determine the wear and tear on internal parts of the engine without having to break it down completely. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

More than meets the eye: Maintainers inspect below the surface

U.S. Air Force Airman 1st Class Travis Nevison, a non-destructive inspection journeyman with the 379th Expeditionary Maintenance Squadron Fabrication Flight, prepares to burn a test oil sample at Al Udeid Air Base, Qatar, Feb. 9, 2017. The joint oil analysis program utilizes oil samples gathered from aircraft to determine the wear and tear on internal parts of the engine without having to break it down completely. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download

More than meets the eye: Maintainers inspect below the surface

U.S. Air Force Airman 1st Class Austin Hall, a non-destructive inspection journeyman with the 379th Expeditionary Maintenance Squadron Fabrication Flight, rinses a piece of metal with an iron particle solution under a black light at Al Udeid Air Base, Qatar, Feb. 9, 2017. Hall was conducting a magnetic particle inspection to look for defects in the metal. (U.S. Air Force photo by Senior Airman Miles Wilson)
Details Download