Mordern lock pick

U.S. Air Force Staff Sgt. Martin Johnston, 380th Air Expeditionary Civil Engineer Squadron locksmith, disassembles a combination lock to a safe at an undisclosed location in Southwest Asia July 2, 2013. Johnston will attempt to fix the lock or open the safe without damaging it; if the lock cannot be disengaged it will be cut open to reach the contents inside. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Sawing it down to size

U.S. Air Force Senior Airman Andrew Gutierrez, 380th Expeditionary Civil Engineer Squadron structures apprentice, saws a pillar to the proper height needed for a wall at an undisclosed location in Southwest Asia July 2, 2013. The wall will be part of a new morale area being built for the 380th Expeditionary Force Support Squadron. Gutierrez is native to El Paso, Texas, and is deployed from Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Sawing it open

U.S. Airman 1st Class Megan Carver, 380th Expeditionary Civil Engineer Squadron locksmith, saws into a safe at an undisclosed location in Southwest Asia July 2, 2013. If the safe is not empty, Carver must ensure that she can open the safe without damaging any of the contents inside. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Tent city

A view of a tent city used by the 380th Air Expeditionary Wing at an undisclosed location in Southwest Asia July 2, 2013. The 380th Expeditionary Civil Engineer Squadron’s Structures Shop maintains all tents and hardened facilities on the installation. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Wall build

U.S. Air Force Staff Sgt. Alexander Fletcher, left, and Airman 1st Steven Baxter, 380th Expeditionary Civil Engineer Squadron structures apprentices, build a wall frame at an undisclosed location in Southwest Asia July 2, 2013. The wall will be used for a new morale area for the 380th Expeditionary Force Support Squadron. Fletcher is native to Las Vegas, Nev., Baxter hails from San Bruno, Calif., and both are deployed from Joint Base Lewis-McChord, Wash. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Wall stand up

U.S. Air Force Staff Sgt. Alexander Fletcher, standing, and Airman 1st Steven Baxter, 380th Expeditionary Civil Engineer Squadron structures apprentices, secure a wall to a pillar at an undisclosed location in Southwest Asia July 2, 2013. Fletcher is native to Las Vegas, Nev., Baxter hails from San Bruno, Calif., and both are deployed from Joint Base Lewis-McChord, Wash. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res
Wire pull

U.S. Air Force Airman 1st Class David Johnson, 380th Expeditionary Civil Engineer Squadron structures apprentice, pulls wire ties from a tie bundle at an undisclosed location in Southwest Asia July 2, 2013. The wire ties will be used to re-secure tent flies in tent city. Johnson hails from Duluth, Minn., and is deployed from Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air Force photo by Staff Sgt. Joshua J. Garcia)

Photo Details / Download Hi-Res

380th ECES Structures shop builds up the base

Published July 5, 2013

380AEW Article

Mordern lock pick

Sawing it down to size

Sawing it open

Tent city

Wall build

Wall stand up

Wire pull